AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » amp input stage

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: amp input stage [message #8887 is a reply to message #8885]

Sat, 09 April 2005 08:14

Wayne Parham
Messages: 18791
Registered: January 2001

Illuminati (33rd Degree)

I think it's kinda like friction. If you're trying to lubricate your main bearings, you can't reduce it enough but if you're trying to launch from the lights, you want tires with as much as you can get.

Increase impedance and noise immunity goes down. Reduce impedance and you need more drive from the stage in front, or you'll exceed it and increase distortion.

Report message to a moderator

[Message index]

		amp input stage By: PakProtector on Sat, 09 April 2005 05:42
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 06:49
		Re: amp input stage By: PakProtector on Sat, 09 April 2005 10:58
		Re: amp input stage By: Manualblock on Sat, 09 April 2005 11:31
		Re: amp input stage By: Wayne Parham on Sat, 09 April 2005 08:14
		Re: amp input stage By: Steve on Mon, 11 April 2005 21:49
		some test results... By: PakProtector on Sun, 17 April 2005 07:39
		Re: some test results... By: Steve on Wed, 01 June 2005 20:22

Previous Topic:	Cathode drive
Next Topic:	November 2005 Vacuum Tube Valley Southern California Audio Festival

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 21:17:31 CST 2024