AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 3pi crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 3pi crossover [message #88429 is a reply to message #88428]

Thu, 12 July 2018 16:12

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

Each model uses a different crossover. The midwoofer circuits are usually pretty similar and the tweeter circuits are almost always nearly the same, except for the R1/R2 values. But different drivers use slightly different parts.

You can learn more about the design/optimization process at the link below:

Crossover optimization for DI-matched two-way speakers

Report message to a moderator

[Message index]

		3pi crossover By: dbbarnes2 on Wed, 11 July 2018 23:13
		Re: 3pi crossover By: Wayne Parham on Thu, 12 July 2018 08:55
		Re: 3pi crossover By: dbbarnes2 on Thu, 12 July 2018 14:05
		Re: 3pi crossover By: Wayne Parham on Thu, 12 July 2018 16:12
		Re: 3pi crossover By: dbbarnes2 on Thu, 12 July 2018 22:49

Previous Topic:	4Pi Rough concept
Next Topic:	Build Thread: 2Pi Towers, 6Pi Corner horns (and possibly a sub and center)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 11:42:38 CDT 2024