AudioRoundTable.com: Thermionic Emissions

Home » Audio » Thermionic Emissions » Today's Puzzler

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Today's Puzzler - Solved [message #8694 is a reply to message #8677]

Sat, 15 January 2005 19:22

TubeCraft
Messages: 30
Registered: May 2009

Baron

Seems the interstage transformer on the output of the stage (Parafeed connection) wasn't doing it's share loading the tube - or it's shorting. Then I removed the transformer connection - and measured with no load at all - very dumb - I guess my cheap VOM isn't really a "load."

I replaced the transformer primary with a cap and a resistor and voila - 2.9v in and 24.9v out.

Makes sense - no load - no current flow - no current, no volts. 3 days of beating my head on my workbench....

Thanks for the suggestions guys, the breadboard on the workbench eventually told the tale.

It's gonna be a kickin' amp when it's done.

Report message to a moderator

[Message index]

		Today's Puzzler By: TubeCraft on Wed, 12 January 2005 12:52
		Do you have grid stoppers? By: BrownEyes on Wed, 12 January 2005 13:27
		Re: Do you have grid stoppers? By: TubeCraft on Wed, 12 January 2005 13:45
		Grid stoppers- No change By: TubeCraft on Thu, 13 January 2005 06:07
		Re: Today's Puzzler By: Damir on Thu, 13 January 2005 06:06
		Re: Today's Puzzler By: TubeCraft on Thu, 13 January 2005 06:13
		Re: Today's Puzzler By: colinhester on Thu, 13 January 2005 17:54
		Re: Today's Puzzler - Solved By: TubeCraft on Sat, 15 January 2005 19:22
		I do love the "solved" posts By: PakProtector on Tue, 18 January 2005 09:20
		Re: Here's the why! By: TubeCraft on Wed, 19 January 2005 10:08
		test first... By: PakProtector on Wed, 19 January 2005 12:02

Previous Topic:	Bypassing Caps
Next Topic:	Do You Know Which Is The Best 845 Tube?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 09 00:37:50 CDT 2024