AudioRoundTable.com: Speaker » Mono "flanking sub"

Home » Audio » Speaker » Mono "flanking sub"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mono "flanking sub" [message #81659 is a reply to message #81658]

Mon, 09 November 2015 21:14

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

You can always provide equalization to fine-tune the response. That sometimes offers additional improvement. But the biggest advantage is from summing of multiple sound sources, which smoothes the sound field using dense interference. That's the point of multisubs, of which flanking subs are a specialized subset. The best performance comes from running both flanking subs and one or two distributed subs.

What you've done is to dial in a single sub. Running it to relatively high frequency and blending it with the mains tends to smooth the self-interference from nearest boundaries, which is using the principle of the flanking sub approach. That's good, but like I said, I think it may make localization a problem on some material. Still, your measurements have shown it to be effective for you, at least for smoothing of the 80-150Hz range, which is the range where flanking subs are most effective.

Report message to a moderator

[Message index]

		Mono "flanking sub" By: jonone on Sat, 24 October 2015 05:50
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 25 October 2015 15:20
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 08:14
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 26 October 2015 08:44
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 12:05
		Re: Mono "flanking sub" By: jonone on Mon, 26 October 2015 15:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 27 October 2015 13:23
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 27 October 2015 18:14
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 04:10
		Re: Mono "flanking sub" By: johnnycamp5 on Thu, 29 October 2015 11:24
		Re: Mono "flanking sub" By: jonone on Thu, 29 October 2015 14:23
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 05:10
		Re: Mono "flanking sub" By: jonone on Fri, 30 October 2015 05:17
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 30 October 2015 16:37
		Re: Mono "flanking sub" By: johnnycamp5 on Fri, 30 October 2015 17:58
		Re: Mono "flanking sub" By: jonone on Sat, 31 October 2015 13:21
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 31 October 2015 15:37
		Re: Mono "flanking sub" By: jonone on Sun, 08 November 2015 13:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 12:57
		Re: Mono "flanking sub" By: jonone on Mon, 09 November 2015 14:44
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 09 November 2015 21:14
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 14:06
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 10 November 2015 14:43
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 15:21
		Re: Mono "flanking sub" By: jonone on Tue, 10 November 2015 16:21
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 11 November 2015 14:16
		Re: Mono "flanking sub" By: jonone on Wed, 11 November 2015 14:38
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 11:01
		Re: Mono "flanking sub" By: Wayne Parham on Tue, 24 November 2015 12:46
		Re: Mono "flanking sub" By: jonone on Tue, 24 November 2015 14:01
		Re: Mono "flanking sub" By: jonone on Wed, 25 November 2015 16:12
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 25 November 2015 18:08
		Re: Mono "flanking sub" By: jonone on Thu, 26 November 2015 02:58
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 27 November 2015 16:23
		Re: Mono "flanking sub" By: jonone on Sat, 28 November 2015 11:29
		Re: Mono "flanking sub" By: jonone on Sun, 29 November 2015 14:41
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 30 November 2015 10:31
		Re: Mono "flanking sub" By: jonone on Mon, 30 November 2015 12:27
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 12:01
		Re: Mono "flanking sub" By: jonone on Tue, 01 December 2015 16:05
		Re: Mono "flanking sub" By: johnnycamp5 on Tue, 01 December 2015 20:10
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 02:58
		Re: Mono "flanking sub" By: johnnycamp5 on Wed, 02 December 2015 05:19
		Re: Mono "flanking sub" By: jonone on Wed, 02 December 2015 07:07
		Re: Mono "flanking sub" By: jonone on Sat, 05 December 2015 08:27
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 05 December 2015 15:54
		Re: Mono "flanking sub" By: jonone on Sun, 06 December 2015 04:26
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 03:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 08:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 10:50
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 11:08
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 12:39
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 12:46
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 13:01
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 13:40
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 14:30
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 14 July 2016 15:00
		Re: Mono "flanking sub" By: jonone on Thu, 14 July 2016 15:32
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 03:27
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 08:36
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 08:49
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 10:25
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 11:09
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 13:41
		Re: Mono "flanking sub" By: jonone on Fri, 15 July 2016 13:53
		Re: Mono "flanking sub" By: Wayne Parham on Fri, 15 July 2016 17:16
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 01:37
		Re: Mono "flanking sub" By: Wayne Parham on Sat, 16 July 2016 09:06
		Re: Mono "flanking sub" By: jonone on Sat, 16 July 2016 09:25
		Re: Mono "flanking sub" By: johnnycamp5 on Sat, 16 July 2016 11:48
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 09:31
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 10:04
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 11:16
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:05
		Re: Mono "flanking sub" By: jonone on Sun, 17 July 2016 12:55
		Re: Mono "flanking sub" By: Wayne Parham on Sun, 17 July 2016 15:31
		Re: Mono "flanking sub" By: johnnycamp5 on Sun, 17 July 2016 16:18
		Re: Mono "flanking sub" By: jonone on Mon, 18 July 2016 07:52
		Re: Mono "flanking sub" By: Wayne Parham on Mon, 18 July 2016 10:46
		Re: Mono "flanking sub" By: jonone on Wed, 10 August 2016 13:25
		Re: Mono "flanking sub" By: Wayne Parham on Wed, 10 August 2016 15:01
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 08:00
		Re: Mono "flanking sub" By: Wayne Parham on Thu, 11 August 2016 08:40
		Re: Mono "flanking sub" By: jonone on Thu, 11 August 2016 14:54
		Re: Mono "flanking sub" By: jonone on Fri, 21 October 2016 12:52

Previous Topic:	Interconnect cables
Next Topic:	Class d for flanking subs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 18:01:01 CST 2024