AudioRoundTable.com: Speaker » Attenuating B & C DE250 on Pi horn

Home » Audio » Speaker » Attenuating B & C DE250 on Pi horn (using the standard 4Pi crossover in another app.)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Attenuating B & C DE250 on Pi horn [message #81437 is a reply to message #81436]

Mon, 06 July 2015 09:01

Wayne Parham
Messages: 18838
Registered: January 2001

Illuminati (33rd Degree)

The attenuation chart gives the right values for R1/R2 at various levels while maintaining the right damping for the crossover. Just use series/parallel resistors to maintain the right values for each position.

An example is using two 20Ω resistors and two 30Ω resistors to make a 25Ω resistor. Or of course four 16Ω resistors in series/parallel make 16Ω total.

Report message to a moderator

[Message index]

		Attenuating B & C DE250 on Pi horn By: turnitdown on Sun, 05 July 2015 15:01
		Re: Attenuating B & C DE250 on Pi horn By: Wayne Parham on Mon, 06 July 2015 09:01

Previous Topic:	Electrostatic or Electrodynamic?
Next Topic:	Hasty mistake

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Mar 01 12:59:09 CST 2025