AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4Pi build

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4Pi build [message #81433 is a reply to message #81406]

Thu, 02 July 2015 15:12

pizzacat666
Messages: 9
Registered: May 2015
Location: Seattle

Esquire

Can you tell me what kind of connector panels are included in the 4 pi kit and how big they are? I have a 3 inch hole saw I was going to use, but I don't have any idea if that is an appropriate size without having seen the panels. I'd like to make the panel area look like this:

http://audioroundtable.com/forum/index.php?t=msg&th=15168&prevloaded=1&&start=50

I picked up a 4x10 of 3/4" MDF and I'm going to cut it down and start assembling the cabinets tomorrow.

Attachment: BigmouthinDC_4Pi_HomeTheater_26_BindingPosts.jpg
(Size: 42.37KB, Downloaded 5294 times)

Report message to a moderator

[Message index]

		4Pi build By: pizzacat666 on Fri, 19 June 2015 13:50
		Re: 4Pi build By: Wayne Parham on Sat, 20 June 2015 10:17
		Re: 4Pi build By: pizzacat666 on Wed, 24 June 2015 12:55
		Re: 4Pi build By: Wayne Parham on Wed, 24 June 2015 14:00
		Re: 4Pi build By: pizzacat666 on Thu, 02 July 2015 15:12
		Re: 4Pi build By: Wayne Parham on Sat, 04 July 2015 08:40
		Re: 4Pi build By: pizzacat666 on Wed, 08 July 2015 15:14
		Re: 4Pi build By: Wayne Parham on Thu, 09 July 2015 10:19
		Re: 4Pi build By: pizzacat666 on Wed, 26 August 2015 13:00
		Re: 4Pi build By: Wayne Parham on Wed, 26 August 2015 15:44
		Re: 4Pi build By: BobTahoe on Wed, 26 August 2015 15:50
		Re: 4Pi build By: pizzacat666 on Wed, 26 August 2015 17:21
		Re: 4Pi build By: BobTahoe on Wed, 26 August 2015 17:26
		Re: 4Pi build By: rvsixer on Wed, 26 August 2015 17:36

Previous Topic:	4Pi plan
Next Topic:	Hi Wayne, info on 3 Pi sub please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 10:01:08 CDT 2024