Home » Sponsored » Pi Speakers » 4 pi speakers + 3 pi subwoofers, pics & measurements (How to interpret the measurements?)
Re: 4 pi speakers + 3 pi subwoofers, pics & measurements [message #81367 is a reply to message #81366] Sun, 31 May 2015 09:48 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

The waveguide is ours, I knew that. We're the only ones that make it. But I wasn't sure about the driver or crossover. Now that I know the driver is the DE250, in my mind, that leaves only crossover and measurement system. And I doubt the crossover is doing it. It looks like you have it right. You can always double-check it, but I'm sure you've already done that.

My guess is the measurement system is at fault. Not the microphones, but the system, itself. Seeing two microphones show the same trend tells me it's probably not the microphones. The only thing that's really left is the system. The input circuitry could cause this, or any number of other things internal to the system.

How does it sound? If there is as much rolloff as would seem to be shown in the measurements, it would sound very muddy and dull, almost like no tweeter was connected. Does it sound that way?

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 4Pi Crossover Update
Next Topic: 2pi plans
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Nov 30 05:59:43 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest