Home » Sponsored » Pi Speakers » 4 pi speakers + 3 pi subwoofers, pics & measurements (How to interpret the measurements?)
Re: 4 pi speakers + 3 pi subwoofers, pics & measurements [message #81357 is a reply to message #81354] Wed, 27 May 2015 08:05 Go to previous messageGo to previous message
vandevoordekoen is currently offline  vandevoordekoen
Messages: 18
Registered: January 2013
Chancellor

To measure the tweeter right, I've put the microphone in the tweeter throat

index.php?t=getfile&id=1721&private=0


These are the measurements with the ecm8000 calibration file uploaded

1. Right tweeter

index.php?t=getfile&id=1725&private=0



2. Left tweeter

index.php?t=getfile&id=1723&private=0



Same measurements without ecm8000 calibration file


1. Right tweeter

index.php?t=getfile&id=1724&private=0


2. Left tweeter

index.php?t=getfile&id=1722&private=0


The measurements without calibration file look approximately like the published sheets (little more rolloff).

But what with the steeper roloff when measured at the listening position?

And what about the measurements with calibration file (which are more accurate, no?)

Could it be possible that I made a mistake when making the crossover so the CD compensation isn't working?

Thanks in advance.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 4Pi Crossover Update
Next Topic: 2pi plans
Goto Forum:
  


Current Time: Thu Oct 17 18:49:22 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest