AudioRoundTable.com: Pi Speakers » 2227h vs 2226h for 4pi

Home » Sponsored » Pi Speakers » 2227h vs 2226h for 4pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2227h vs 2226h for 4pi [message #80776 is a reply to message #80772]

Sat, 01 November 2014 18:18

dandydlandy
Messages: 4
Registered: October 2014
Location: southern ca

Esquire

Thank you very much Wayne!
Any technical insight on why you prefer the 2226 in your design? from what I've been reading up on the 2227 seems a little harder to balance in a design because of it's rising response. I'm too not sure, but it seems that the 2227h would not be 4db more efficient that the 2226h in it's bandpass. The 2227h is measured to have less power compression but is power compression a big concern when designing such a high efficiency speaker for home use?

Report message to a moderator

[Message index]

		2227h vs 2226h for 4pi By: dandydlandy on Thu, 30 October 2014 01:43
		Re: 2227h vs 2226h for 4pi By: Wayne Parham on Fri, 31 October 2014 10:25
		Re: 2227h vs 2226h for 4pi By: dandydlandy on Sat, 01 November 2014 18:18
		Re: 2227h vs 2226h for 4pi By: Wayne Parham on Sun, 02 November 2014 07:42
		Re: 2227h vs 2226h for 4pi By: dandydlandy on Wed, 10 December 2014 03:32
		Re: 2227h vs 2226h for 4pi By: Wayne Parham on Wed, 10 December 2014 10:02
		Re: 2227h vs 2226h for 4pi By: dandydlandy on Mon, 15 December 2014 03:15
		Re: 2227h vs 2226h for 4pi By: Wayne Parham on Mon, 15 December 2014 09:59

Previous Topic:	Two PI: A Little Bright OR Light in the Bass?
Next Topic:	4PI Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 16 21:20:31 CDT 2024