AudioRoundTable.com: Pi Speakers » 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR?

Home » Sponsored » Pi Speakers » 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? (Need help deciding what to do!)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? [message #80329 is a reply to message #80322]

Fri, 29 August 2014 11:41

Wayne Parham
Messages: 18783
Registered: January 2001

Illuminati (33rd Degree)

I'll refrain from comment on the technologies you may choose from, except to say that these speakers have been compared before in various forums. You might want to look at the H290C Horn/Waveguide thread for detailed information on our waveguide implementation. There is a comparison between the SEOS and π waveguides in the thread called, "Uniform Directivity - How important is it?". If you search the net, you'll find many other threads on this and similar topics.

After you've done your research, when you decide with model you want to build, let me know and I'll send plans. You might choose one model for mains and another for surrounds. Please decide and let me know. For more information to help you choose, you can look at the π Speakers FAQ page.

I would suggest that you study the differences between speakers having uniform directivity and those that don't. That's what speakers with waveguides strive to achieve - uniform directivity. They do this with varying degrees of success, and over a varied range of the audio spectrum. Look at the pros and cons of that, and the trade-offs involved. It's a set of competing priorities, like most other things. So you have to decide what's important to you, considering your application and your budget.

Report message to a moderator

[Message index]

		2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: corradizo on Thu, 28 August 2014 12:33
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: Wayne Parham on Fri, 29 August 2014 11:41
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: corradizo on Sat, 30 August 2014 07:19
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: Wayne Parham on Sat, 30 August 2014 09:55
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: corradizo on Sat, 30 August 2014 11:20
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: Wayne Parham on Sun, 31 August 2014 07:07
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: corradizo on Tue, 09 September 2014 11:00
		Re: 2pi, 3pi, Zaph ZA5.3 for In-Wall LCR? By: Wayne Parham on Tue, 09 September 2014 16:21

Previous Topic:	My new 4Pis
Next Topic:	B&C Schematics

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 11 04:55:04 CST 2024