Home » Sponsored » Pi Speakers » New Pi 4 + Pi 3 Sub buildout
Re: New Pi 4 + Pi 3 Sub buildout [message #79751 is a reply to message #79750] Sun, 23 March 2014 19:43 Go to previous messageGo to previous message
jshupe is currently offline  jshupe
Messages: 31
Registered: January 2014
Location: Austin, Texas
Baron
tom-m wrote on Sun, 23 March 2014 19:36
Billy Thorpe's Children of the Sun
Now there's a blast from the past. That is one to play loud.



It's one of the ones where we drove the system up to a higher volume. ~90+dB at minimum, for that song. Probably closer to 100dB (don't want to annoy the neighbors!) You're right: it's meant to play loud. I think it's great for showing off the sound stage of these, because of all the effects that transition rapidly between channels. Those can easily sound rough on lesser systems.

Quote:
I have a pair of speakers, close to the Pi4. I already had some drivers, but not what Wayne uses. But I needed to save cost, so I used what I had. The crossover I use is from Wayne. I ordered it built, with upgraded coils and resistors. The amp I use is a 35 watt Dynaco 70 clone. One of my favorite upgrades on the amp is the VTA Octal driver board using Octal input tubes. I use new old stock GE input 6SN7 and new phase splitter 6SN7 tung sol reissues.

I agree with most all the decriptions of the speakers. They sound great. Dynamics and power like no other. Now I am trying figure out what type of subwoofer to use.



What driver did you use? Your amp sounds neat; I'm going to build a tube kit of some sort in the near future. I don't think you can go wrong with the 3 Pi subs. Get two!
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Home theater with 4PI & 1 Pi
Next Topic: New Here - 7pi and ??? for LCR
Goto Forum:
  


Current Time: Fri Nov 22 02:46:09 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest