AudioRoundTable.com: Pi Speakers » 3Pi Speaker plans request

Home » Sponsored » Pi Speakers » 3Pi Speaker plans request (Please)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 3Pi Speaker plans request [message #79004 is a reply to message #79003]

Tue, 21 January 2014 08:02

Wayne Parham
Messages: 18722
Registered: January 2001

Illuminati (33rd Degree)

Don't change the cabinet dimensions unless you have measuring equipment and can verify the changes made. Cabinets this size develop standing waves in the lower midrange, so dimensions and woofer and port position are important. You do not want a pressure node to be where the woofer or port are, because that would cause response ripple.

Cabinet design, port placement and internal standing waves

Report message to a moderator

[Message index]

		3Pi Speaker plans request By: cguyome on Tue, 14 January 2014 22:24
		Re: 3Pi Speaker plans request By: Wayne Parham on Wed, 15 January 2014 09:51
		Re: 3Pi Speaker plans request By: cguyome on Tue, 21 January 2014 02:00
		Re: 3Pi Speaker plans request By: Wayne Parham on Tue, 21 January 2014 08:02
		Re: 3Pi Speaker plans request By: cguyome on Wed, 15 January 2014 20:39
		Re: 3Pi Speaker plans request By: cguyome on Tue, 21 January 2014 09:10
		Re: 3Pi Speaker plans request By: Wayne Parham on Tue, 21 January 2014 09:55
		Re: 3Pi Speaker plans request By: stoli on Thu, 23 January 2014 13:22
		Re: 3Pi Speaker plans request By: Wayne Parham on Thu, 23 January 2014 14:02

Previous Topic:	H290C at or above 2kHz
Next Topic:	Speaker stuffing

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 11 13:18:53 CDT 2024