AudioRoundTable.com: Pi Speakers » Flanking subs and phase

Home » Sponsored » Pi Speakers » Flanking subs and phase

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Flanking subs and phase [message #78888]

Sun, 05 January 2014 18:42

sfdoddsy
Messages: 2
Registered: January 2014

Esquire

I have been using stereo flanking subs for a while but have a question about best practice.

My amp (Crown XTi) has DSP built-in and thus I have the ability to delay my mains to match their respective flanking sub. I can also adjust phase on the subs.

So the question is should I adjust the phase for each main/flanking pairing to get the flattest measured response? I use REW.

Report message to a moderator

[Message index]

		Flanking subs and phase By: sfdoddsy on Sun, 05 January 2014 18:42
		Re: Flanking subs and phase By: Wayne Parham on Mon, 06 January 2014 12:42
		Re: Flanking subs and phase By: sfdoddsy on Mon, 06 January 2014 16:03

Previous Topic:	4pi: B&C DE 250 Impedance, is it 8 or 16 ohms?
Next Topic:	1pi or 2pi for surrounds?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 28 06:18:07 CDT 2024