Home » Sponsored » Pi Speakers » 4Pi with feet (images of my 4pi project)
Re: 4Pi with feet [message #78218 is a reply to message #78216] Mon, 28 October 2013 19:18 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18784
Registered: January 2001
Illuminati (33rd Degree)

It shouldn't be hard to install the T-Nuts. Just drill the holes slightly smaller than the T-Nut shank, so there is an interference fit. The trick is to have a little bit of friction to provide some clamping force, but not so much that the threads strip when you pull them in. Use a dab of epoxy and pull 'em all in with a sacrificial screw. Change screws every three or four T-Nuts, so you don't damage the threads. Basically just follow the directions on the link a few posts back.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message icon14.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: New Here - 7pi and ??? for LCR
Next Topic: H290C Horn Tweeter Review
Goto Forum:
  


Current Time: Mon Nov 18 21:12:31 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest