AudioRoundTable.com: Pi Speakers » Pi Crossover Boards and Biamping

Home » Sponsored » Pi Speakers » Pi Crossover Boards and Biamping

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pi Crossover Boards and Biamping [message #76132]

Mon, 01 April 2013 21:40

rkeman
Messages: 78
Registered: March 2010
Location: Florida

Viscount

Is there any convenient way to allow biamping of the speaker (i.e. separating the woofer and tweeter or midrange/tweeter) using the Pi crossover PCB? Also, the bare PCB pictured doesn't seem to have the wire terminals soldered to the board as in the preassembled crossover. Are these available from Pi Speakers or some other source?

Report message to a moderator

[Message index]

		Pi Crossover Boards and Biamping By: rkeman on Mon, 01 April 2013 21:40
		Re: Pi Crossover Boards and Biamping By: Wayne Parham on Tue, 02 April 2013 10:48
		Re: Pi Crossover Boards and Biamping By: rkeman on Tue, 02 April 2013 11:52
		Re: Pi Crossover Boards and Biamping By: Wayne Parham on Tue, 02 April 2013 12:53
		Re: Pi Crossover Boards and Biamping By: rkeman on Tue, 02 April 2013 13:43
		Re: Pi Crossover Boards and Biamping By: Wayne Parham on Tue, 02 April 2013 14:03
		Re: Pi Crossover Boards and Biamping By: Dave_S on Wed, 03 April 2013 01:47
		Re: Pi Crossover Boards and Biamping By: Wayne Parham on Wed, 03 April 2013 09:50
		Re: Pi Crossover Boards and Biamping By: dheflin44 on Wed, 03 April 2013 11:57
		Re: Pi Crossover Boards and Biamping By: Dave_S on Wed, 03 April 2013 12:40
		Re: Pi Crossover Boards and Biamping By: Nelson Bass on Wed, 03 April 2013 15:13
		Re: Pi Crossover Boards and Biamping By: Dave_S on Wed, 03 April 2013 21:19

Previous Topic:	2 Pi Tower Plan
Next Topic:	2225H midwoofers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 02:38:55 CST 2024