Home » Sponsored » Pi Speakers » 2Pi Towers First Listen
Re: 2Pi Towers First Listen [message #75605 is a reply to message #75603] Fri, 22 February 2013 13:39 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18747
Registered: January 2001
Illuminati (33rd Degree)

The crossover is the same for the two π and two π tower speakers. The only difference between the two is response below 100Hz.

The port is large and low, on the rear panel. Specifically, it's 4.5" diameter, centered 7" up from the bottom of the cabinet. This position is very important, as is the location of the midwoofer on the front baffle. It was chosen specifically to minimize the influence of low-midrange internal standing waves on the response curve.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 3pi plans request
Next Topic: Pi = ahhhhhh
Goto Forum:
  


Current Time: Sun Aug 11 07:26:02 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest