AudioRoundTable.com: Pi Speakers » 3pi, smaller cab possible?

Home » Sponsored » Pi Speakers » 3pi, smaller cab possible?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 3pi, smaller cab possible? [message #75064 is a reply to message #75062]

Thu, 27 December 2012 22:50

Wayne Parham
Messages: 18727
Registered: January 2001

Illuminati (33rd Degree)

I think that's probably worthwhile. being sealed will make it a little less vulnerable to standing waves, because there is no worry a port will lie on a pressure node. And smaller cabinets shift the internal standing waves upward in frequency, where the stuffing is better able to damp them. So both those things go in your favor. Still, I'd measure it just to be sure.

Report message to a moderator

[Message index]

		3pi, smaller cab possible? By: smokarz on Thu, 23 June 2011 18:27
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 23 June 2011 18:39
		Re: 3pi, smaller cab possible? By: smokarz on Thu, 23 June 2011 18:51
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 23 June 2011 19:26
		Re: 3pi, smaller cab possible? By: smokarz on Thu, 30 June 2011 07:51
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 30 June 2011 08:55
		Re: 3pi, smaller cab possible? By: smokarz on Thu, 30 June 2011 09:57
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 30 June 2011 12:32
		Re: 3pi, smaller cab possible? By: smokarz on Sat, 02 July 2011 09:39
		Re: 3pi, smaller cab possible? By: Wayne Parham on Sat, 02 July 2011 10:32
		Re: 3pi, smaller cab possible? By: zheka on Thu, 27 December 2012 17:04
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 27 December 2012 19:14
		Re: 3pi, smaller cab possible? By: zheka on Thu, 27 December 2012 19:37
		Re: 3pi, smaller cab possible? By: Wayne Parham on Thu, 27 December 2012 22:50
		Re: 3pi, smaller cab possible? By: smokarz on Sat, 02 July 2011 11:22
		Re: 3pi, smaller cab possible? By: Wayne Parham on Sat, 02 July 2011 14:35

Previous Topic:	4 Pi plans
Next Topic:	3pi sub

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 18 10:37:25 CDT 2024