AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » H290C dimensions (dimensions for the recessed cutout)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: H290C dimensions [message #74650 is a reply to message #73415]

Thu, 29 November 2012 12:11

dheflin44
Messages: 47
Registered: November 2012
Location: Carrollton, TX

Baron

Sorry to belabor this, but I want to be sure to get the baffle recesses right. In the H290C picture below, it looks like the corner radius is about the same height as the top and bottom flanges which are about 0.8", right?

Attachment: H290C_photo_02.jpg
(Size: 255.28KB, Downloaded 2881 times)

Report message to a moderator

[Message index]

		H290C dimensions By: zheka on Mon, 30 July 2012 13:28
		Re: H290C dimensions By: Wayne Parham on Mon, 30 July 2012 14:18
		Re: H290C dimensions By: zheka on Mon, 30 July 2012 14:36
		Re: H290C dimensions By: gofar99 on Mon, 30 July 2012 16:20
		Re: H290C dimensions By: Wayne Parham on Mon, 30 July 2012 22:43
		Re: H290C dimensions By: zheka on Mon, 30 July 2012 23:38
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 07:20
		Re: H290C dimensions By: gofar99 on Tue, 31 July 2012 10:15
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 10:44
		Re: H290C dimensions By: dheflin44 on Thu, 29 November 2012 12:11
		Re: H290C dimensions By: Wayne Parham on Thu, 29 November 2012 12:33
		Re: H290C dimensions By: dheflin44 on Thu, 29 November 2012 12:46
		Re: H290C dimensions By: zheka on Tue, 31 July 2012 16:48
		Re: H290C dimensions By: Wayne Parham on Tue, 31 July 2012 17:18
		Re: H290C dimensions By: zheka on Wed, 01 August 2012 07:18
		Re: H290C dimensions By: Wayne Parham on Wed, 01 August 2012 07:46

Previous Topic:	Speaker placement and wavefront launch
Next Topic:	Spectral decay time of HF drivers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 20:16:24 CST 2024