AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 4Pi plans

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4Pi plans [message #74624 is a reply to message #74615]

Wed, 28 November 2012 10:02

Wayne Parham
Messages: 18894
Registered: January 2001

Illuminati (33rd Degree)

Actually, I think most people run four π speakers on stands about that height - 12" to 15", with maybe a 3° to 5° tilt back. This is the preferred method with flanking subs.

I've sent plans for the four π mains. If you don't already have subs to flank the mains, let me know and I'll send plans for those also.

http://lonestaraudiofest.com/2009/Photos/PiSpeakers_10.jpg

four π speakers flanked with three π subs

http://lonestaraudiofest.com/2009/Photos/PiSpeakers_02.jpg

Closeup of left speaker and its flanking sub

Report message to a moderator

[Message index]

		4Pi plans By: dheflin44 on Tue, 27 November 2012 23:51
		Re: 4Pi plans By: Wayne Parham on Wed, 28 November 2012 10:02
		Re: 4Pi plans By: dheflin44 on Wed, 28 November 2012 23:48
		Re: 4Pi plans By: tom-m on Fri, 01 February 2013 14:19
		Re: 4Pi plans By: Harvey on Thu, 07 February 2013 20:54
		Re: 4Pi plans By: Wayne Parham on Fri, 08 February 2013 08:21

Previous Topic:	Flanking Subs vs Helper Woofers
Next Topic:	Pi midhorn: how thick to be effective?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon May 19 09:32:33 CDT 2025