Home » Sponsored » Pi Speakers » L/C/R placement and toe-in (aggressive toe-in for the L/R,what to do with the center channel?)
Re: L/C/R placement and toe-in [message #74549 is a reply to message #74547] Sat, 24 November 2012 08:43 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18791
Registered: January 2001
Illuminati (33rd Degree)

Point the center straight forward. The sound everywhere within the forward lobe is the same, so it isn't more shrill on-axis or more laid back off-axis, provided you are within the 90°x40° forward lobe. That's one of the benefits of constant directivity.

I realize there are some other waveguide speakers that do not sound good on-axis, and the recommendation for those is that they not be setup to listen on-axis. That is probably why you asked. But none of the π Speakers line are that way. Ours are truly uniform, and the spectral balance is the same everywhere within the pattern.

There is a difference in the center channel content though, and it is sometimes mixed hot with dialog. That's the point of the center channel, so it makes sense. But because of that, sometimes people prefer to adjust the volume of the center channel separate from the L/R mains.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: My 4pi project
Next Topic: 3Pi Subwoofer
Goto Forum:
  


Current Time: Sun Dec 01 12:44:23 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest