AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Pi 3 subwoofer

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pi 3 subwoofer [message #73227]

Mon, 09 July 2012 06:37

48h350
Messages: 11
Registered: November 2011
Location: AUSTRALIA

Chancellor

Hi Wayne, you sent me the plans for the Pi 3 sub.
Unfortunately the shipping to Australia is just about as expensive as the driver-Eminence Lab 12-itself, so i am looking for alternatives.
You did approve, in the past,the use of a car sub from JBL: GTO 1214 TD .
So I am thinking of using this driver to build the subs ( 2 )
http://www.jbl.com/resources/Brands/jbl/Products/ProductRelatedDocuments/en-US/BoxesandParameters/GTO1214TD.pdf

I found this piece of software to work out dimensions,port length etc. http://www.ajdesigner.com/fl_subwoofer/subwoofer.php
Is this software good enough to design the enclosure or would you use something else?
What alignment would you recommend?
Would you build a sub just as wide as the Pi 4 and use it as a stand?
Thanks for your work.

Massimo

Report message to a moderator

[Message index]

		Pi 3 subwoofer By: 48h350 on Mon, 09 July 2012 06:37
		Re: Pi 3 subwoofer By: Wayne Parham on Mon, 09 July 2012 08:08
		Re: Pi 3 subwoofer By: 48h350 on Thu, 12 July 2012 18:30
		Re: Pi 3 subwoofer By: Wayne Parham on Thu, 12 July 2012 20:09
		Re: Pi 3 subwoofer By: 48h350 on Thu, 12 July 2012 21:37
		Helmholtz formula By: Wayne Parham on Thu, 12 July 2012 22:11
		Re: Helmholtz formula By: 48h350 on Thu, 12 July 2012 23:17

Previous Topic:	4pi plans
Next Topic:	Pi7 Mid Horn Question's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 18 00:37:05 CDT 2024