AudioRoundTable.com: Pi Speakers » 4 pi plans, please

Home » Sponsored » Pi Speakers » 4 pi plans, please

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4 pi with alternate compression drivers [message #73119 is a reply to message #65814]

Sun, 24 June 2012 16:03

tom-m
Messages: 56
Registered: December 2009
Location: Texas

Baron

I was noticing on the 3pi crossover, that when connecting the compression driver, the polarity is opposite depending if using the B&C or Eminence. If one did use the Radian 475 as mentioned above, how would it connect in the 3pi?

Thanks.

Report message to a moderator

[Message index]

		4 pi plans, please By: dryfly_6x on Thu, 20 January 2011 11:05
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Thu, 20 January 2011 11:55
		Re: 4 pi with alternate compression drivers By: dryfly_6x on Thu, 20 January 2011 12:26
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Thu, 20 January 2011 13:27
		Re: 4 pi with alternate compression drivers By: dryfly_6x on Sun, 23 January 2011 13:44
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Sun, 23 January 2011 16:45
		Re: 4 pi with alternate compression drivers By: tom-m on Sun, 24 June 2012 16:03
		Re: 4 pi with alternate compression drivers By: Wayne Parham on Sun, 24 June 2012 19:45

Previous Topic:	3 pi sub
Next Topic:	4 Pi Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 26 05:37:00 CST 2024