AudioRoundTable.com: Pi Speakers » Novice and maybe silly question about R3

Home » Sponsored » Pi Speakers » Novice and maybe silly question about R3 (4 Pi crossover)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Novice and maybe silly question about R3 [message #71867 is a reply to message #71864]

Wed, 21 March 2012 08:13

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

The big silver block that comes with the crossover is R3. It is not optional - It must be connected to the crossover board at the R3 connector. Mount it with screws to the inside bottom of the cabinet, right beside the crossover.

Also, make two gaskets from cardboard or sheet PVC. One should be the same size as the crossover and the other is the same size as R3. Use the gaskets underneath the crossover parts when mounting them.

Gaskets

Report message to a moderator

[Message index]

		Novice and maybe silly question about R3 By: santos on Wed, 21 March 2012 04:07
		Re: Novice and maybe silly question about R3 By: Wayne Parham on Wed, 21 March 2012 08:13
		Re: Novice and maybe silly question about R3 By: santos on Wed, 21 March 2012 10:37
		Re: Novice and maybe silly question about R3 By: dutchswan0311 on Thu, 22 March 2012 15:18

Previous Topic:	Request for plans
Next Topic:	Screws

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 01:15:02 CDT 2024