AudioRoundTable.com: Pi Speakers » Mounts for 1pi Speakers

Home » Sponsored » Pi Speakers » Mounts for 1pi Speakers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mounts for 1pi Speakers [message #71731 is a reply to message #71603]

Mon, 12 March 2012 15:55

Maxjr
Messages: 57
Registered: August 2011

Baron

Wayne Parham wrote on Wed, 29 February 2012 22:06

I think that will work, but make very sure that the mount will hold. It looks like one of the adjustment slots is open, so I'd make sure that slot opened upwards (so that gravity will tend to hold it in place even if the screw loosens). You certainly don't one coming loose.

It looks like the picture is upside down. If it's not, I would certainly mount it upside down as it'll be reinforced as Wayne said.

Report message to a moderator

[Message index]

		Mounts for 1pi Speakers By: dutchswan0311 on Tue, 21 February 2012 17:57
		Re: Mounts for 1pi Speakers By: Wayne Parham on Tue, 21 February 2012 18:50
		Re: Mounts for 1pi Speakers By: dutchswan0311 on Tue, 21 February 2012 18:54
		Re: Mounts for 1pi Speakers By: Wayne Parham on Tue, 21 February 2012 23:37
		Re: Mounts for 1pi Speakers By: dutchswan0311 on Mon, 27 February 2012 11:27
		Re: Mounts for 1pi Speakers By: Wayne Parham on Mon, 27 February 2012 13:35
		Re: Mounts for 1pi Speakers By: dutchswan0311 on Wed, 29 February 2012 20:02
		Re: Mounts for 1pi Speakers By: Wayne Parham on Wed, 29 February 2012 22:06
		Re: Mounts for 1pi Speakers By: Maxjr on Mon, 12 March 2012 15:55
		Re: Mounts for 1pi Speakers By: dutchswan0311 on Mon, 12 March 2012 15:58

Previous Topic:	two π tower port and positioning questions
Next Topic:	Just can't let that poor, dead horse alone! With PIX!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 08:00:33 CST 2024