AudioRoundTable.com: Pi Speakers » Powering my PI Speakers

Home » Sponsored » Pi Speakers » Powering my PI Speakers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Powering my PI Speakers [message #71408 is a reply to message #71399]

Fri, 17 February 2012 17:34

dutchswan0311
Messages: 102
Registered: June 2011
Location: Iowa

Viscount

Does that school of thought, though tested and tried experience, suggest what % the amp be rated beyond the rating of the driver? 10% (e.g. 330watt amp for 300 watt driver?)

I am not looking to put more through the 1pis, as it seems unlikely the surround channels would really receive a signal from the preamp that would even hit the 100W they are rated for (correct me if I'm wrong).

I guess I would be more concerned with ensuring the 4pis and subs are used to their full potential.

Report message to a moderator

[Message index]

		Powering my PI Speakers By: dutchswan0311 on Fri, 17 February 2012 14:42
		Re: Powering my PI Speakers By: Wayne Parham on Fri, 17 February 2012 15:51
		Re: Powering my PI Speakers By: dutchswan0311 on Fri, 17 February 2012 16:15
		Re: Powering my PI Speakers By: Wayne Parham on Fri, 17 February 2012 16:58
		Re: Powering my PI Speakers By: dutchswan0311 on Fri, 17 February 2012 17:34
		Re: Powering my PI Speakers By: Wayne Parham on Fri, 17 February 2012 18:49
		Re: Powering my PI Speakers By: dutchswan0311 on Fri, 17 February 2012 19:05

Previous Topic:	4 Pi - Horn to middle of baffle?
Next Topic:	1Pi - 2Pi plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Sep 18 04:24:56 CDT 2024