AudioRoundTable.com: Pi Speakers » 3 Pi subs paralleled from plate amp

Home » Sponsored » Pi Speakers » 3 Pi subs paralleled from plate amp

Sat, 14 January 2012 13:22

skywave-rider
Messages: 104
Registered: May 2009

Viscount

Wayne,
I am considering building a pair of 3 Pi subs to flank mains. I would like to put a plate amp in one, and parallel the amp out to the other sub.

These are the amps I would consider:
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=300-750
or:
http://www.parts-express.com/pe/showdetl.cfm?Partnumber=300-752&FTR=bash%20500

Some might say it's not a lot of power, but this would be for portable hi fi use and not a high SPL application.

What do you think about the impedance load?

		3 Pi subs paralleled from plate amp By: skywave-rider on Sat, 14 January 2012 13:22
		Re: 3 Pi subs paralleled from plate amp By: Wayne Parham on Sat, 14 January 2012 14:59
		Re: 3 Pi subs paralleled from plate amp By: skywave-rider on Sat, 14 January 2012 15:41

Previous Topic:	1Pi, 2Pi and 2Pi Tower Plans
Next Topic:	Mid Horn Throat Covering?

Goto Forum:

] [

]

Current Time: Wed Jul 24 06:26:18 CDT 2024