AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Alpha 10 modeling

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Alpha 10 modeling [message #70524 is a reply to message #70523]

Tue, 20 December 2011 18:03

rvsixer
Messages: 58
Registered: February 2011

Baron

The graph is in imperial units, xmax = 0.126in ~ 3.2mm.

I have played with the default tuning winisd calculates after providing box size/port dia/port length to 40Hz. This change shows 8.86mm cone excursion @ 60Hz (still way over xmax).

I am going to give unibox a whirl and see what happens.

Report message to a moderator

[Message index]

		Alpha 10 modeling By: solomty on Fri, 17 April 2009 16:09
		Re: Alpha 10 modeling By: Wayne Parham on Fri, 17 April 2009 16:37
		Re: Alpha 10 modeling By: rvsixer on Tue, 20 December 2011 09:48
		Re: Alpha 10 modeling By: Wayne Parham on Tue, 20 December 2011 13:51
		Re: Alpha 10 modeling By: rvsixer on Tue, 20 December 2011 16:17
		Re: Alpha 10 modeling By: Wayne Parham on Tue, 20 December 2011 17:00
		Re: Alpha 10 modeling By: rvsixer on Tue, 20 December 2011 18:03
		Re: Alpha 10 modeling By: Wayne Parham on Tue, 20 December 2011 18:09
		Re: Alpha 10 modeling By: rvsixer on Tue, 20 December 2011 20:14
		Re: Alpha 10 modeling By: Wayne Parham on Tue, 20 December 2011 20:28
		Re: Alpha 10 modeling By: rvsixer on Tue, 20 December 2011 20:53
		Re: Alpha 10 modeling By: Wayne Parham on Tue, 20 December 2011 21:45

Previous Topic:	1 Pi Plans
Next Topic:	1 π plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 07 04:59:28 CDT 2024