chakija Messages: 14 Registered: October 2011 Location: Serbia
Chancellor
Hi Wayne,
I took your advice and made original box proportionally larger so that inner volume is cca 137 liters. I applied distance between horn and upper edge and 285mm c2c for woofer and tweeter.
I decided to flush mount woofer because i like it that way and i will fix alignment with crossover if needed. Material is MDF, front baffle 25mm and side are 19mm. Bracing in corners is 30x30mm and other two are 20x50mm made of hardwood. I made BR vent 105 because bass box pro (that i am simulating with) showed too big vent noise for smaller diameter. I will fine tune length later, but it will be around 70mm.
If you say this all is good enough, i will send cutting plans in workshop asap
One more question... do you have any experience with motor run capacitors used in crossover instead of "audio grade" caps?
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
and i will fix alignment with crossover if needed. Material is MDF, front baffle 25mm and side are 19mm. Bracing in corners is 30x30mm and other two are 20x50mm made of hardwood. I made BR vent 105 because bass box pro (that i am simulating with) showed too big vent noise for smaller diameter. I will fine tune length later, but it will be around 70mm.
