| Re: Recording Banjo/Cumbus [message #69344 is a reply to message #69154] |
Mon, 05 September 2011 12:40  |
Thermionic
Messages: 208
Registered: May 2009
|
Master |
|
|
Howdy LizardBat,
I'd say with near certainty you'd get a better sound with the omni mic. If I was recording in a small or sound-treated room, I'd initially try fairly close placement, at somewhere around the neck joint area. Then, I'd move the mic a little at a time towards the bridge and compare the results after each movement.
But, if I had access to a large room with favorable natural reverb characteristics, I'd milk it for all it's worth. I'd use the omni mic placed a bit farther away, to capture some of the natural room ambience.
If the room is too bright, you damp the highest frequencies with strategically placed blankets draped over a makeshift frame. Rolling wardrobe racks are my favorite, but an improvised frame made from PVC pipe is just the ticket if you don't have access to wardrobe racks.
Thermionic
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
