AudioRoundTable.com: Pi Speakers » crossover board assembly

Home » Sponsored » Pi Speakers » crossover board assembly

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: crossover board assembly [message #69239 is a reply to message #69234]

Mon, 29 August 2011 18:02

Wayne Parham
Messages: 18784
Registered: January 2001

Illuminati (33rd Degree)

No trick to it at all. Just trim the component leads to fit and solder them on. The photo below shows me drawing an outline on some gasket material, and it also shows a crossover in enough detail for you to see what I mean:

http://www.pispeakers.com/misc/pcb_gasket_outline.jpg

Report message to a moderator

[Message index]

		crossover board assembly By: dprice on Mon, 29 August 2011 17:20
		Re: crossover board assembly By: Wayne Parham on Mon, 29 August 2011 18:02
		Re: crossover board assembly By: dprice on Mon, 29 August 2011 19:03
		Re: crossover board assembly By: Maxjr on Tue, 30 August 2011 14:39
		Re: crossover board assembly By: Wayne Parham on Tue, 30 August 2011 16:03

Previous Topic:	4 pi, oh my!
Next Topic:	Damping material placement

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Nov 19 00:47:19 CST 2024