AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Midrange Horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Midrange Horn [message #69201 is a reply to message #69200]

Fri, 26 August 2011 18:09

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

It depends on the thickness of the veneer. If you're using thin veneer, you can cover the entire side before assembly. But thick veneers will create enough offset the pieces won't fit together well so you have to trim to fit. On those, it's best to cut the veneer to size before assembly, but don't actually attach it until after assembly. Honestly, the thinner veneers are easier to use for the flare pieces. Save the thicker stuff for the cabinet sides.

Report message to a moderator

[Message index]

		Midrange Horn By: Wayne Parham on Mon, 12 April 2004 01:00
		Horn Basics By: Wayne Parham on Mon, 12 April 2004 01:01
		Cabinets By: Wayne Parham on Mon, 12 April 2004 01:02
		Implementation By: Wayne Parham on Mon, 12 April 2004 01:03
		Re: Implementation By: Adrian Mack on Mon, 12 April 2004 03:08
		Re: Implementation By: Wayne Parham on Mon, 12 April 2004 03:39
		Re: Implementation By: Adrian Mack on Mon, 12 April 2004 05:00
		Re: Implementation By: Wayne Parham on Mon, 12 April 2004 06:17
		Re: Implementation By: Adrian Mack on Mon, 12 April 2004 06:51
		Re: Implementation By: Adrian Mack on Mon, 12 April 2004 18:03
		Re: Implementation By: Wayne Parham on Mon, 12 April 2004 21:11
		funny old woofers By: Mike.e on Mon, 12 April 2004 20:53
		Re: funny old woofers By: Bill Wassilak on Tue, 13 April 2004 10:13
		Re: Implementation By: Wayne Parham on Fri, 16 April 2004 11:00
		Re: Implementation By: Adrian Mack on Fri, 16 April 2004 18:30
		Re: Implementation By: Wayne Parham on Fri, 16 April 2004 18:39
		Re: Implementation By: GarMan on Tue, 13 April 2004 11:22
		Re: Implementation By: Wayne Parham on Wed, 14 April 2004 08:38
		eight π By: Wayne Parham on Mon, 12 April 2004 01:04
		How about the Beta 10CX By: JLapaire on Mon, 12 April 2004 10:44
		Re: How about the Beta 10CX By: Wayne Parham on Mon, 12 April 2004 16:53
		Dimensions By: JLapaire on Tue, 13 April 2004 06:31
		Re: Dimensions By: Wayne Parham on Tue, 13 April 2004 16:21
		Re: eight π By: wasteh202 on Wed, 02 June 2004 22:11
		Re: eight π By: Wayne Parham on Fri, 11 June 2004 09:42
		Re: Midrange Horn By: dwkurfma on Wed, 14 April 2004 11:46
		Re: Midrange Horn By: Adrian Mack on Wed, 14 April 2004 18:00
		Re: Midrange Horn - Thanks! n/t By: dwkurfma on Wed, 14 April 2004 20:59
		7PI midrange horn angle By: hornT on Tue, 09 March 2010 15:01
		Re: 7PI midrange directivity By: Wayne Parham on Tue, 09 March 2010 15:20
		Re: 7PI midrange directivity By: hornT on Wed, 10 March 2010 01:36
		Re: Midrange Horn By: danielm on Sat, 03 April 2010 08:56
		Re: Midrange Horn By: Wayne Parham on Sat, 03 April 2010 09:19
		Re: Midrange Horn By: danielm on Sat, 03 April 2010 10:16
		Re: Midrange Horn By: Wayne Parham on Sat, 03 April 2010 16:21
		Re: Midrange Horn By: danielm on Sat, 03 April 2010 18:23
		Re: Midrange Horn By: Wayne Parham on Sat, 03 April 2010 19:47
		Re: Midrange Horn By: tom-m on Sun, 04 April 2010 20:04
		Re: Midrange Horn By: Wayne Parham on Sun, 04 April 2010 20:43
		Re: Midrange Horn By: tom-m on Tue, 11 May 2010 22:26
		Re: Midrange Horn By: Wayne Parham on Mon, 19 July 2010 20:13
		MID HORN FLAT PACK By: biglaz on Thu, 02 September 2010 12:23
		Re: MID HORN FLAT PACK By: Wayne Parham on Thu, 02 September 2010 13:28
		Midhorn Flat Pack Tips By: Bane2871 on Wed, 24 August 2011 13:29
		Re: Midhorn Flat Pack Tips By: Wayne Parham on Wed, 24 August 2011 13:37
		Re: Midhorn Flat Pack Tips By: Bane2871 on Wed, 24 August 2011 16:56
		Re: Midhorn Flat Pack Tips By: Wayne Parham on Wed, 24 August 2011 17:02
		Re: Midrange Horn By: Bane2871 on Fri, 26 August 2011 17:28
		Re: Midrange Horn By: Wayne Parham on Fri, 26 August 2011 18:09
		Re: Midrange Horn By: djnagle on Fri, 24 February 2012 11:58
		Re: Midrange Horn By: Wayne Parham on Fri, 24 February 2012 12:47
		Re: Midrange Horn By: cookiemonster on Fri, 06 September 2013 16:16
		Re: Midrange Horn By: Wayne Parham on Fri, 06 September 2013 20:35
		Re: Midrange Horn By: cookiemonster on Mon, 09 September 2013 07:49
		Re: Midrange Horn By: Wayne Parham on Mon, 09 September 2013 08:29
		Re: Midrange Horn By: petew on Mon, 09 September 2013 15:04
		Re: Midrange Horn By: Wayne Parham on Mon, 09 September 2013 18:00

Previous Topic:	How good is the 1Pi? Pretty good, I think.
Next Topic:	I covet the 7Pi Plans...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 13:12:57 CST 2024