dutchswan0311 Messages: 102 Registered: June 2011 Location: Iowa
Viscount
Please forgive me if these questions have been asked and answered;
1. What kind of screws do you recommend for the 1pi cabinet? I have been using a combination of 1 1/2" and 1 1/4" #8 wood screws for the 4pi builds, but fear these are to big for 5/8" plywood.
2. As long as the internal dimensions are kept the same, would it be okay to use 3/4" Baltic Birch for the 1pi cabinets?
3. I did not see any mention of cross bracing for the 1pi in the instructions. May I assume this is not necessary with this cabinet?
4. I see the port is round with a diameter of 2 1/2". The schematic shows the port is to be 3 1/2" deep. Is there a round port insert that comes with the kit, or is the depth of the port square while the entrance to the port is round? I am just a little confused how to make a round port with a depth of 3 1/2".
Thanks in advance for any assistance anyone can offer!
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
