AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Excited =)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Excited =) [message #68559 is a reply to message #68558]

Thu, 14 July 2011 22:16

justphil
Messages: 114
Registered: December 2010

Viscount

Well I am kinda ticked at myself. I found some good primer I had sitting around and thought I would try some on a scrap piece. I put it on and it seemed amazing. It sanded well and covered evenly. Well after painting all my pieces I am now finding it doesnt sand for beans and I am having to work three times harder to get it done. I should have stuck with my original plan.

What I am noticing though is that I am sanding my pieces VERY well and the grain of the MDF doesnt seem open at all on the edges. Why would the edge be any different then the top? Its an all man made product and isnt like plywood in layers. Is it maybe sealed on the top and bottom in some way before you get it maybe?

If you have paineted MDF before what did you do?

Report message to a moderator

[Message index]

		Excited =) By: justphil on Sun, 19 June 2011 11:45
		Re: Excited =) By: NWCgrad on Mon, 20 June 2011 17:59
		Re: Excited =) By: justphil on Mon, 20 June 2011 18:23
		Re: Excited =) By: Dave_S on Tue, 21 June 2011 01:29
		Re: Excited =) By: justphil on Sun, 26 June 2011 19:09
		Re: Excited =) By: NWCgrad on Tue, 28 June 2011 17:59
		Re: Excited =) By: justphil on Wed, 29 June 2011 07:59
		Re: Excited =) By: NWCgrad on Wed, 29 June 2011 16:27
		Re: Excited =) By: justphil on Wed, 29 June 2011 22:10
		Re: Excited =) By: justphil on Tue, 05 July 2011 11:28
		Re: Excited =) By: Wayne Parham on Tue, 05 July 2011 14:18
		Re: Excited =) By: justphil on Tue, 05 July 2011 16:55
		Re: Excited =) By: Wayne Parham on Tue, 05 July 2011 18:42
		Re: Excited =) By: Dave_S on Tue, 05 July 2011 23:37
		Re: Excited =) By: justphil on Wed, 06 July 2011 01:29
		Re: Excited =) By: Bill Epstein on Wed, 06 July 2011 06:25
		Re: Excited =) By: justphil on Wed, 06 July 2011 08:30
		Re: Excited =) By: Dave_S on Wed, 06 July 2011 19:44
		Re: Excited =) By: Bill Epstein on Wed, 06 July 2011 22:02
		Re: Excited =) By: Dave_S on Thu, 07 July 2011 22:48
		Re: Excited =) By: justphil on Wed, 13 July 2011 22:52
		Re: Excited =) By: Wayne Parham on Thu, 14 July 2011 12:35
		Re: Excited =) By: justphil on Thu, 14 July 2011 22:16
		Re: Excited =) By: petew on Fri, 15 July 2011 10:08
		Re: Excited =) By: justphil on Sun, 17 July 2011 10:08
		Re: Excited =) By: Wayne Parham on Sun, 17 July 2011 11:12
		Re: Excited =) By: justphil on Sun, 17 July 2011 11:54
		Re: Excited =) By: justphil on Sat, 23 July 2011 13:22
		Re: Excited =) By: justphil on Mon, 25 July 2011 09:32
		Re: Excited =) By: Aki on Mon, 25 July 2011 18:30
		Re: Excited =) By: justphil on Mon, 25 July 2011 19:49
		Re: Excited =) By: dutchswan0311 on Mon, 25 July 2011 21:15
		Re: Excited =) By: justphil on Mon, 25 July 2011 21:22
		Re: Excited =) By: Wayne Parham on Mon, 25 July 2011 10:18
		Re: Excited =) By: corradizo on Tue, 02 September 2014 23:14

Previous Topic:	PI4 Build for home theatre
Next Topic:	Any Pi builders in Ireland ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 21 18:05:28 CST 2024