AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Excited =)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Excited =) [message #68488 is a reply to message #68487]

Wed, 06 July 2011 06:25

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

The site I referenced below is a great place to start. If it isn't mentioned, Tape-ease.com is a good source for veneer ( I like NBL, No Black Line)

http://audioroundtable.com/forum/index.php?t=msg&th=16118

With that double baffle, you have plenty of material to round-over and wrap-around the NBL veneer seamlessly. Just don't make the mistake I did and place your dowels longitudinally Very Happy

http://audioroundtable.com/forum/index.php?t=msg&th=16209

index.php?t=getfile&id=534&private=0

Thats' wax paper over the dowels; kind of a belt and suspenders way to keep out of contact adhesive hell but turned out to be unnecessary.

I use dowels because they come off the adhesive easily w/o taking a lot of it with. Once I got the technique down, I decided that next time, I'll round-over the rear corners as well and wrap the veneer all the way around to the back.

The far smaller and lighter 2Pis should be really easy.

Attachment: Ready To Roll_1.JPG
(Size: 133.58KB, Downloaded 5886 times)
Attachment: IMG_2107_1.JPG
(Size: 142.05KB, Downloaded 419 times)

Report message to a moderator

[Message index]

		Excited =) By: justphil on Sun, 19 June 2011 11:45
		Re: Excited =) By: NWCgrad on Mon, 20 June 2011 17:59
		Re: Excited =) By: justphil on Mon, 20 June 2011 18:23
		Re: Excited =) By: Dave_S on Tue, 21 June 2011 01:29
		Re: Excited =) By: justphil on Sun, 26 June 2011 19:09
		Re: Excited =) By: NWCgrad on Tue, 28 June 2011 17:59
		Re: Excited =) By: justphil on Wed, 29 June 2011 07:59
		Re: Excited =) By: NWCgrad on Wed, 29 June 2011 16:27
		Re: Excited =) By: justphil on Wed, 29 June 2011 22:10
		Re: Excited =) By: justphil on Tue, 05 July 2011 11:28
		Re: Excited =) By: Wayne Parham on Tue, 05 July 2011 14:18
		Re: Excited =) By: justphil on Tue, 05 July 2011 16:55
		Re: Excited =) By: Wayne Parham on Tue, 05 July 2011 18:42
		Re: Excited =) By: Dave_S on Tue, 05 July 2011 23:37
		Re: Excited =) By: justphil on Wed, 06 July 2011 01:29
		Re: Excited =) By: Bill Epstein on Wed, 06 July 2011 06:25
		Re: Excited =) By: justphil on Wed, 06 July 2011 08:30
		Re: Excited =) By: Dave_S on Wed, 06 July 2011 19:44
		Re: Excited =) By: Bill Epstein on Wed, 06 July 2011 22:02
		Re: Excited =) By: Dave_S on Thu, 07 July 2011 22:48
		Re: Excited =) By: justphil on Wed, 13 July 2011 22:52
		Re: Excited =) By: Wayne Parham on Thu, 14 July 2011 12:35
		Re: Excited =) By: justphil on Thu, 14 July 2011 22:16
		Re: Excited =) By: petew on Fri, 15 July 2011 10:08
		Re: Excited =) By: justphil on Sun, 17 July 2011 10:08
		Re: Excited =) By: Wayne Parham on Sun, 17 July 2011 11:12
		Re: Excited =) By: justphil on Sun, 17 July 2011 11:54
		Re: Excited =) By: justphil on Sat, 23 July 2011 13:22
		Re: Excited =) By: justphil on Mon, 25 July 2011 09:32
		Re: Excited =) By: Aki on Mon, 25 July 2011 18:30
		Re: Excited =) By: justphil on Mon, 25 July 2011 19:49
		Re: Excited =) By: dutchswan0311 on Mon, 25 July 2011 21:15
		Re: Excited =) By: justphil on Mon, 25 July 2011 21:22
		Re: Excited =) By: Wayne Parham on Mon, 25 July 2011 10:18
		Re: Excited =) By: corradizo on Tue, 02 September 2014 23:14

Previous Topic:	PI4 Build for home theatre
Next Topic:	Any Pi builders in Ireland ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 15:15:19 CST 2024