Home » Sponsored » Pi Speakers » Plans Request (Plans please...)
Re: Plans Request [message #68280 is a reply to message #68275] Tue, 21 June 2011 15:54 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18758
Registered: January 2001
Illuminati (33rd Degree)

You can't really know what modifications will do without measurements. Sometimes, they're non-issues, other times they really make a difference. In general, the smaller cabinets can be tweaked a little bit in the dimensions because internal standing waves are high enough in frequency that the insulation effectively absorbs them. This makes woofer and port location a little less critical. But you do really need to keep the driver position on the baffle the same for the crossover, otherwise its phase will not interact with baffle spacing to give the right forward lobe. Don't spread the woofer and tweeter apart, for example, because this will make the forward lobe thinner, possibly too thin, depending on spacing.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 1 Pi and 4 Pi Speaker Plan request
Next Topic: JBL 2206 and Three Pi
Goto Forum:
  


Current Time: Thu Sep 12 02:19:45 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest