AudioRoundTable.com: Pi Speakers » Rabbet dimensions for flush mounting (4Pi upgraded)

Home » Sponsored » Pi Speakers » Rabbet dimensions for flush mounting (4Pi upgraded) (Flush Mounting)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Rabbet dimensions for flush mounting (4Pi upgraded) [message #66989 is a reply to message #66981]

Sun, 10 April 2011 23:17

Wayne Parham
Messages: 18748
Registered: January 2001

Illuminati (33rd Degree)

You definitely do not want a zero tolerance fit when using wood, or even a really tight fit. Give it as least 1/16" extra, and probably better to oversize 1/8". That little gap you leave isn't much.

Report message to a moderator

[Message index]

		Rabbet dimensions for flush mounting (4Pi upgraded) By: blvdre on Sun, 10 April 2011 08:58
		Re: Rabbet dimensions for flush mounting (4Pi upgraded) By: Wayne Parham on Sun, 10 April 2011 12:45
		Re: Rabbet dimensions for flush mounting (4Pi upgraded) By: blvdre on Sun, 10 April 2011 19:34
		Re: Rabbet dimensions for flush mounting (4Pi upgraded) By: Wayne Parham on Sun, 10 April 2011 23:17
		Re: Rabbet dimensions for flush mounting (4Pi upgraded) By: blvdre on Mon, 11 April 2011 05:41

Previous Topic:	It's Here! T-2020 Chip Amp
Next Topic:	Three Pi & Four Pi Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Aug 12 00:25:08 CDT 2024