AudioRoundTable.com: Pi Speakers » Tweeter Change (again !)

Home » Sponsored » Pi Speakers » Tweeter Change (again !)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tweeter Change (again !) [message #66440 is a reply to message #66435]

Wed, 02 March 2011 15:16

AudioFred
Messages: 377
Registered: May 2009
Location: Houston

Illuminati (1st Degree)

steve f wrote on Wed, 02 March 2011 13:11

Roy,
One problem I've noticed with the B-G is every vendor advertises different efficiency ratings.
Steve

Danny Ritchie has included links to frequency response curves and other data for the Neo 3 standard and PDR versions. I noticed the sensitivity of the PDR is listed as 93.5dB (2.83V/1M) with the back cup in place, and 90.5dB in dipole mode.

http://www.gr-research.com/index.asp?PageAction=VIEWPROD&ProdID=129

Report message to a moderator

[Message index]

		Tweeter Change (again !) By: RDLewis on Sat, 26 February 2011 15:20
		Re: Tweeter Change (again !) By: steve f on Sat, 26 February 2011 18:52
		Re: Tweeter Change (again !) By: Wayne Parham on Sat, 26 February 2011 19:31
		Re: Tweeter Change (again !) By: Bill Epstein on Sat, 26 February 2011 20:38
		Re: Tweeter Change (again !) By: steve f on Sun, 27 February 2011 09:22
		Re: Tweeter Change (again !) By: RDLewis on Mon, 28 February 2011 15:31
		Re: Tweeter Change (again !) By: steve f on Wed, 02 March 2011 13:11
		Re: Tweeter Change (again !) By: AudioFred on Wed, 02 March 2011 15:16
		Re: Tweeter Change (again !) By: Wayne Parham on Wed, 02 March 2011 16:12
		Re: Tweeter Change (again !) By: steve f on Thu, 03 March 2011 11:31
		Re: Tweeter Change (again !) By: RDLewis on Wed, 02 March 2011 14:27
		Re: Tweeter Change (again !) By: Wayne Parham on Wed, 02 March 2011 15:04

Previous Topic:	seven plan request
Next Topic:	2226j (16 ohm) usable?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Aug 03 09:20:07 CDT 2024