AudioRoundTable.com: Pi Speakers » Source for Black Machine Screws?

Home » Sponsored » Pi Speakers » Source for Black Machine Screws?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Source for Black Machine Screws? [message #66319 is a reply to message #66303]

Fri, 25 February 2011 15:48

Matts
Messages: 359
Registered: May 2009

Grand Master

I found some similar to what Wayne mentioned at my local Ace Hardware, in different sizes. I also use them to attach iron and tube sockets to amps; I think they look cool. Another approach, if you're not using t-nuts (which you should use!), is to get brass wood screws and darken them.

Report message to a moderator

[Message index]

		Source for Black Machine Screws? By: pizzachef on Thu, 24 February 2011 21:22
		Re: Source for Black Machine Screws? By: Wayne Parham on Thu, 24 February 2011 22:34
		Re: Source for Black Machine Screws? By: Bill Epstein on Sat, 26 February 2011 21:06
		Re: Source for Black Machine Screws? By: Matts on Fri, 25 February 2011 15:48

Previous Topic:	matching 3pi subwoofer with a high sensitivity speaker like the 4Pi
Next Topic:	My Two π Tower

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Sep 17 00:57:27 CDT 2024