AudioRoundTable.com: Speaker » Magnepan 1.7 Crossover

Home » Audio » Speaker » Magnepan 1.7 Crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Magnepan 1.7 Crossover [message #65497 is a reply to message #65494]

Sat, 01 January 2011 11:18

AudioFred
Messages: 377
Registered: May 2009
Location: Houston

Illuminati (1st Degree)

Wayne Parham wrote on Sat, 01 January 2011 09:47

I have exactly zero experience with Magnapans so I have no advice but do have a question. Isn't the membrane primarily capacitive? OK, no, two questions. Is the supertweeter also electrostatic or does it have a voice coil?

The driver elements are almost entirely resistive, with almost no capacitance or inductance. For every Magnepan element the "voice coil" isn't a coil at all. It's the wires (or the ribbon in the case of the 3.6 and above) that are glued to the mylar diaphram, which react with the rows of magnets behind the diaphragm, causing it to move.
http://www.magnepan.com/magneplanar_technology

Report message to a moderator

[Message index]

		Magnepan 1.7 Crossover By: AudioFred on Fri, 31 December 2010 17:27
		Re: Magnepan 1.7 Crossover By: Adveser on Fri, 31 December 2010 19:39
		Re: Magnepan 1.7 Crossover By: Wayne Parham on Sat, 01 January 2011 09:47
		Re: Magnepan 1.7 Crossover By: AudioFred on Sat, 01 January 2011 11:18
		Re: Magnepan 1.7 Crossover By: Wayne Parham on Sat, 01 January 2011 13:11
		Re: Magnepan 1.7 Crossover By: Adveser on Sat, 01 January 2011 14:50

Previous Topic:	Subwoofers
Next Topic:	Can you Patch the Hole in a Speaker?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 21:05:27 CST 2024