AudioRoundTable.com: Pi Speakers » Where/what is the information about the drivers, etc for the 2Pi models?

Home » Sponsored » Pi Speakers » Where/what is the information about the drivers, etc for the 2Pi models?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Where/what is the information about the drivers, etc for the 2Pi models? [message #64719 is a reply to message #64718]

Mon, 15 November 2010 19:11

Wayne Parham
Messages: 18711
Registered: January 2001

Illuminati (33rd Degree)

The impedance of the load is really more problematic for tube amps when it rises, so Zmax is probably the bigger issue for you. Fortunately, Zmax is very low. Great for tubes.

There are no driver options for the one π, two π or two π tower speakers. The only drivers available are the standard parts. Some of the larger models have optional upgrade drivers, but not the one π or two π loudspeakers.

The drivers (and associated PDF specifications files) are listed on this page:

π Speakers Product Line and Driver Complements

Here's the response and impedance charts for the two π tower:

http://www.pispeakers.com/Measurements/twoPi_tower_response.jpg

two π tower response

http://www.pispeakers.com/Measurements/twoPi_tower_impedance.jpg

two π tower impedance

Report message to a moderator

[Message index]

		Where/what is the information about the drivers, etc for the 2Pi models? By: Frihed89 on Mon, 15 November 2010 17:27
		Re: Where/what is the information about the drivers, etc for the 2Pi models? By: Wayne Parham on Mon, 15 November 2010 19:11
		Re: Where/what is the information about the drivers, etc for the 2Pi models? By: Frihed89 on Tue, 16 November 2010 07:38
		Re: Where/what is the information about the drivers, etc for the 2Pi models? By: Shane on Wed, 17 November 2010 20:37

Previous Topic:	One more time
Next Topic:	More Fun with Capacitors

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jun 29 11:44:24 CDT 2024