AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Pi4 New Owner

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Pi4 New Owner [message #64620 is a reply to message #64618]

Mon, 08 November 2010 20:40

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

I think your saying the H290 is sealed to the cabinet?

Silicone caulk never completely dries so it should be possible to slip a razor knife into it at the junction and cut a slit all the way around, then pry at it with gradually increasing pressure until the silicone releases.

Cutting the slit first ensures that some silicone remains on the wood and doesn't pull away from and damage it.

Report message to a moderator

[Message index]

		Pi4 New Owner By: Doc Jr 8156 on Mon, 08 November 2010 13:43
		Re: Pi4 New Owner By: Wayne Parham on Mon, 08 November 2010 14:50
		Re: Pi4 New Owner By: Doc Jr 8156 on Mon, 08 November 2010 16:43
		Re: Pi4 New Owner By: Bill Epstein on Mon, 08 November 2010 20:40
		Re: Pi4 New Owner By: Doc Jr 8156 on Mon, 08 November 2010 23:00
		Re: Pi4 New Owner By: Wayne Parham on Mon, 08 November 2010 23:08
		Re: Pi4 New Owner By: Doc Jr 8156 on Tue, 09 November 2010 10:12
		Re: Pi4 New Owner By: Wayne Parham on Tue, 09 November 2010 18:27
		Re: Pi4 New Owner By: Doc Jr 8156 on Wed, 10 November 2010 10:01

Previous Topic:	Pi2 and woofer directivity
Next Topic:	2Pi questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 05:28:54 CDT 2024