AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Kilomax-18 (Kilomax-18 Sub???)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Position of nulls from adjacent sound sources [message #63692 is a reply to message #63662]

Thu, 05 August 2010 12:29

Wayne-o
Messages: 225
Registered: May 2009

Master

Well I was off topic, I was talking about putting a horn crossed at 800 hz with a mid driver like a Omega-15. Would they blend close together or would you need to separate them 5-6 inches in order to smooth them ?

Report message to a moderator

[Message index]

		Kilomax-18 By: Wayne-o on Wed, 21 July 2010 13:19
		Re: Kilomax-18 By: Wayne Parham on Wed, 21 July 2010 15:58
		Re: Kilomax-18 By: Wayne-o on Wed, 21 July 2010 21:36
		Re: Kilomax-18 By: Wayne Parham on Wed, 21 July 2010 22:45
		Please forgive my jumping in... By: GarlandB on Thu, 22 July 2010 12:11
		Omega 15 and Delta 15 By: Wayne Parham on Thu, 22 July 2010 13:02
		Re: Omega 15 and Delta 15 By: Wayne-o on Thu, 22 July 2010 18:51
		Re: Omega 15 and Delta 15 By: Wayne Parham on Thu, 22 July 2010 19:01
		Re: Kilomax-18 By: Wayne-o on Thu, 22 July 2010 21:47
		Re: Kilomax-18 By: Wayne Parham on Fri, 23 July 2010 08:05
		Re: Kilomax-18 By: Wayne-o on Sun, 25 July 2010 00:34
		Modal smoothing using dense interference from multiple sound sources By: Wayne Parham on Sun, 25 July 2010 09:37
		Re: Modal smoothing using dense interference from multiple sound sources By: Wayne-o on Wed, 04 August 2010 21:24
		Position of nulls from adjacent sound sources By: Wayne Parham on Wed, 04 August 2010 22:16
		Re: Position of nulls from adjacent sound sources By: Wayne-o on Thu, 05 August 2010 12:29
		Re: Position of nulls from adjacent sound sources By: Wayne Parham on Thu, 05 August 2010 13:24

Previous Topic:	Pi 4.5 possible?
Next Topic:	Speaker Cabinet builders in Boston area?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 07 17:01:14 CDT 2024