AudioRoundTable.com: Pi Speakers » 4Pi crossover issue

Home » Sponsored » Pi Speakers » 4Pi crossover issue

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 4Pi crossover issue [message #63137 is a reply to message #63132]

Fri, 11 June 2010 15:37

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

Cold solder joints can do that. Usually, a bad connection causes symptoms just like you're thinking, a make or break deal. But cold solders are different. You can have a junction with resistance, not completely disconnected.

Report message to a moderator

[Message index]

		4Pi crossover issue By: Bill Epstein on Fri, 11 June 2010 08:33
		Re: 4Pi crossover issue By: Wayne Parham on Fri, 11 June 2010 15:37
		Re: 4Pi crossover issue By: Bill Epstein on Mon, 14 June 2010 21:24
		Re: 4Pi crossover issue By: Wayne Parham on Tue, 15 June 2010 01:32
		Re: 4Pi crossover issue By: Bill Epstein on Tue, 15 June 2010 13:55
		Re: 4Pi crossover issue By: Wayne Parham on Tue, 15 June 2010 14:27
		Re: 4Pi crossover issue By: Bill Epstein on Tue, 15 June 2010 18:20
		Subs and crossovers By: Wayne Parham on Tue, 15 June 2010 19:37
		Re: Subs and crossovers By: Bill Epstein on Tue, 15 June 2010 20:22
		Re: Subs and crossovers By: Wayne Parham on Tue, 15 June 2010 21:53
		Info for Bill By: spkrman57 on Thu, 17 June 2010 10:46
		Re: Info for Bill By: Bill Epstein on Thu, 17 June 2010 21:01
		Digging up old pics! By: spkrman57 on Fri, 18 June 2010 11:00
		Re: Digging up old pics! By: candoon on Fri, 18 June 2010 18:23
		Re: 4Pi crossover issue By: Bill Epstein on Sat, 19 June 2010 18:12
		Re: 4Pi crossover issue By: Wayne Parham on Sun, 20 June 2010 08:59

Previous Topic:	Pi 3 plans Please
Next Topic:	3Pi/4Pi Plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 09:11:30 CST 2024