AudioRoundTable.com: Pi Speakers » insulation for the 2pi tower

Home » Sponsored » Pi Speakers » insulation for the 2pi tower

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: insulation for the 2pi tower [message #62710 is a reply to message #62709]

Sat, 15 May 2010 20:50

Wayne Parham
Messages: 18778
Registered: January 2001

Illuminati (33rd Degree)

That's right. Do a cross-brace 1/3rd up from the bottom and another 1/3rd down from the top. Use 1x2 wood stock or scrap of approximately the same dimensions, and make them snug, but not too tight. Just snug enough that light tapping is all it takes to put them in place.

Report message to a moderator

[Message index]

		insulation for the 2pi tower By: fuj32 on Sat, 15 May 2010 14:06
		Re: insulation for the 2pi tower By: Wayne Parham on Sat, 15 May 2010 18:14
		Re: insulation for the 2pi tower By: fuj32 on Sat, 15 May 2010 18:31
		Re: insulation for the 2pi tower By: Wayne Parham on Sat, 15 May 2010 20:50

Previous Topic:	Pi kits?
Next Topic:	12PI plan or CAD ?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 17 23:58:27 CDT 2024