AudioRoundTable.com: Pi Speakers » Port Tube Needed for 2Pi Towers?

Home » Sponsored » Pi Speakers » Port Tube Needed for 2Pi Towers?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Port Size for 2Pi Towers [message #62431 is a reply to message #62430]

Wed, 28 April 2010 19:22

Wayne Parham
Messages: 18883
Registered: January 2001

Illuminati (33rd Degree)

That's right. The plans show port diameters for 5/8" or 3/4" panel thickness. Others are shown here:

For 5/8" wood stock, cut a 4.5" diameter port hole.
For 3/4" stock, cut a 4.625" hole.
For 1", cut the hole 4.75" diameter.
For 1.5", cut the hole 5.125".

Report message to a moderator

[Message index]

		Port Tube Needed for 2Pi Towers? By: breakfastchef on Wed, 24 March 2010 21:41
		Re: Port Tube Needed for 2Pi Towers? By: Wayne Parham on Thu, 25 March 2010 00:54
		Re: Port Tube Needed for 2Pi Towers? By: dB on Wed, 28 April 2010 18:26
		Port Size for 2Pi Towers By: Wayne Parham on Wed, 28 April 2010 19:22

Previous Topic:	looking at 6 Pi's
Next Topic:	7 pi plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Apr 29 12:25:57 CDT 2025