AudioRoundTable.com: Pi Speakers » Double thickness front?

Home » Sponsored » Pi Speakers » Double thickness front?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Double thickness front? [message #62153 is a reply to message #62149]

Sun, 21 March 2010 20:24

Wayne Parham
Messages: 18778
Registered: January 2001

Illuminati (33rd Degree)

Port length should be measured from entrance to exit, no matter what you've done with the baffle. So if the baffle is 3/4", then a 10" port should extend 9.25" back from it. If the baffle is 1.5", the port should extend back 8.5" back. Overall length - entrance to exit - should be 10".

Report message to a moderator

[Message index]

		Double thickness front? By: CZ Eddie on Sat, 20 March 2010 12:33
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 10:20
		Re: Double thickness front? By: CZ Eddie on Sun, 21 March 2010 11:38
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 12:31
		Re: Double thickness front? By: BigmouthinDC on Sun, 21 March 2010 15:12
		Re: Double thickness front? By: Wayne Parham on Sun, 21 March 2010 20:24
		Re: Double thickness front? By: Infrasonic on Wed, 24 March 2010 01:05
		Re: Double thickness front? By: Wayne Parham on Wed, 24 March 2010 10:12

Previous Topic:	Info request about Pi-one/two and subs
Next Topic:	Speaker Plans Please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Oct 19 16:34:09 CDT 2024