Wayne Parham Messages: 18748 Registered: January 2001
Illuminati (33rd Degree)
The plans show outside dimensions and specify 3/4" stock. What you can do if you want to route a recess to mount the drivers flush is to cut a ring to increase thickness just in the driver mounting area. Glue it behind the baffle, increasing the thickness in where the routed recess is cut and where the T-Nuts go. This adds thickness without displacing much internal volume. Or you can simply add another panel in front of the cabinet to increase front baffle thickness.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
