AudioRoundTable.com: Pi Speakers » Possibly Naive Qs from Newbie... resistors in xover

Home » Sponsored » Pi Speakers » Possibly Naive Qs from Newbie... resistors in xover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Possibly Naive Qs from Newbie... resistors in xover [message #62101 is a reply to message #62099]

Tue, 16 March 2010 13:50

krikor
Messages: 31
Registered: May 2009
Location: Detroit

Baron

Thanks Wayne... I'm sticking with the Dayton resistors for now. They only have a 12.5 and 16 so I'll be half an ohm above the 28 spec (or use the 20 and 8?).

Out of curiosity, what do you use for the 4pi when using Mills in place of the 16 ohm resistors? That's my next project Smile

Report message to a moderator

[Message index]

		Possibly Naive Qs from Newbie... resistors in xover By: krikor on Tue, 16 March 2010 13:18
		Re: Possibly Naive Qs from Newbie... resistors in xover By: Wayne Parham on Tue, 16 March 2010 13:24
		Re: Possibly Naive Qs from Newbie... resistors in xover By: krikor on Tue, 16 March 2010 13:50
		Re: Possibly Naive Qs from Newbie... resistors in xover By: Wayne Parham on Tue, 16 March 2010 14:16

Previous Topic:	Baffle Step
Next Topic:	7PI midrange horn box volume

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 15:08:05 CST 2024