AudioRoundTable.com: Speaker » Bose Line Array

Home » Audio » Speaker » Bose Line Array (L1 portable line array)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Bose Line Array [message #61008 is a reply to message #61007]

Thu, 24 September 2009 07:52

selahaudio
Messages: 56
Registered: September 2009

Baron

The new JBL CBT arrays are aimed right at the Bose systems in terms of cost. You can read about them here http://www.jblpro.com/catalog/general/ProductFamily.aspx?FId=89&MId=2

Looks like in the coaxial system they are using a 1" dome. Nice to know that I helped design the first CBT arrays installed in the USA Smile

We used a passive tapering arrangement and the curve applies the delay. If you run a straight column you would need to go active in order to control the delay along the length of the line.

Report message to a moderator

[Message index]

		Bose Line Array By: audiomagic on Wed, 23 September 2009 18:32
		Re: Bose Line Array By: Marlboro on Wed, 23 September 2009 19:48
		Re: Bose Line Array By: selahaudio on Wed, 23 September 2009 21:10
		Re: Bose Line Array By: audiomagic on Thu, 24 September 2009 06:37
		Re: Bose Line Array By: selahaudio on Thu, 24 September 2009 06:52
		Re: Bose Line Array By: AudioFred on Thu, 24 September 2009 07:17
		Re: Bose Line Array By: audiomagic on Thu, 24 September 2009 07:39
		Re: Bose Line Array By: selahaudio on Thu, 24 September 2009 07:52
		Re: Bose Line Array By: audiomagic on Thu, 24 September 2009 08:48
		Re: Bose Line Array By: selahaudio on Thu, 24 September 2009 09:58

Previous Topic:	Tweeter Options for Line Arrays
Next Topic:	Crossover Question about building line arrays

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 23:24:01 CST 2024