AudioRoundTable.com: Speaker » Audio Note AN-K - Changing internal wiring from silver to copper

Home » Audio » Speaker » Audio Note AN-K - Changing internal wiring from silver to copper

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Audio Note AN-K - Changing internal wiring from silver to copper [message #60612 is a reply to message #60078]

Sun, 16 August 2009 17:57

dB
Messages: 234
Registered: May 2009

Master

I don't have (any) experience, but I would say the cables are not the culprit. It must be the tweeter, in this case (since you have them/tweeters - I'm just guessing like a said) a bad job in xover design. You probably want a more relaxed sound with an attenuation on highs of 1 or 2 dB's. The type of room/furniture and distance to speakers can also affect the overall.

John Fogerty - Deja Vu

Report message to a moderator

[Message index]

		Audio Note AN-K - Changing internal wiring from silver to copper By: soundguest on Tue, 07 July 2009 04:31
		Re: Audio Note AN-K - Changing internal wiring from silver to copper By: dB on Sun, 16 August 2009 17:57

Previous Topic:	JBL K2 and Everest speakers
Next Topic:	Basic requirements for phase plug in horn loaded cone driver?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 13 06:40:55 CDT 2024